~V|CONSTRUNARIO|FIEBDC-3/2012|Construnario Versión 3.51||ANSI|||||https://www.construnario.com/bc3/11052/|
~K|\2\2\3\2\2\2\2\EUR\|0|
~C|P28130|u|Circuit breaker RECmax P-D2-6|37767|290124|0|
~T|P28130|The RECmax P series are 2- and 4-pole circuit breakers connected to a compact motor and internal control unit that enables automatic reclosing system.

After triggering, the switch reconnects following a sequence of 3 reconnections, with 3 minutes between resets. If the unit is not able to reconnect after 3 attempts, it remains triggered until a manual or remote reset is made. They can also be connected remotely to an external control. It has two inputs that through voltage-free external signals, order the opening (input O) and subsequent closing (reclosing system) of the automatic switch (input I) . They function as protection against shortcircuit and overload, and can also be used as a remote circuit breaker.

The switch status is indicated by LED signals on the device’s front panel. An green ON LED indicates that the device is in service; a red OFF LED indicates that the device is triggered.

A TEST/RESET of the device can be performed by pressing a button to check the triggering and then reset the device.

It also has two single-contact outputs for signalling the status and the cause of the opening and closing of the automatic switch (trigger, manual/Test).
Código EAN: 8433059150525|
~F|P28130|0\CMP911_1_PR1905BI1526_P28130_RECmax_P_D2_6_IMD.jpg\CMP911 1 PR1905BI1526 P28130 RECmax P D2 6 IMD|
~F|P28130|0\44A7CC7C9E598D5115E3BEEFCF08FF35.pdf\44A7CC7C9E598D5115E3BEEFCF08FF35|