CIRCUTOR S.A.U.

4-input impulse centralising equipment. Inputs are optoisolated to read impulses and it has a 32-bit memory to store the values metered. It has an RS-485 communications port that can be used with an RS-232 or Ethernet converter to read and write the unit's records remotely, using the PowerStudio management software. The RS-485 bus can be used to connect up to 32 units that use this type of communications The unit's outputs can be programmed to generate impulses or for remote control actions with the PowerStudio software

The LM4A-2IO-M is an analogue and digital signals centralizer. In only 4 DIN modules, the unit has 2 relay outpus and centralizes 4 analogue inputs from 0 ... 20 mA, 2 voltagefree digital input. The unit includes an RS- 485 communications bus with a Modbus/ RTU protocol, which allows real time control by communications. The unit is compatible with PowerStudio and PowerStudio SCADA control software. Other features: Telemanagement of the 2 digital outputs Supervision of the 2 digital inputs Monitoring of the 4 analogue inputs

Impulse centralizing unit, with up to 50 devices. The inputs of the centralizing unit are optocoupled to read the said impulses and it also has a memory to store up to 32 bits of data. It has two communications ports: RS-485 Port: It can be used to connect up to 31 CIRCUTOR units that can be monitored with the PowerStudio software. This port acts as a gateway from Ethernet to RS-485 Ethernet 10Base / 100Base TX Port that can be used by the PowerStudio energy management software to carry out the read and write operations of the 50 inputs of the LM, and all other units in the RS-485 network.