HIPLUS AIRE ACONDICIONADO, S.L.

Fully removable 20 mm of thickness sandwich panels. They are composed of galvanized steel inside or outside sandwich panels, easy to open. Units are precoated galvanized sheet metal frame RAL 9002. The unit is equipped with crossed air-to-air heat recovery with aluminum heat exchanger plates and supplementary sealing. It has aluminum condensate tray with 2 outlet tubes that covers all of heating/cooling components. Contain mineral wool heat and sound insulation with 20 mm of thickness, density 40 kg/m3 and fire reaction A1. Supply and exhaust fans are centrifugal double inlet forward curved and a multispeed electric motor directly coupled to the turbine. The unit is completed with electric box IP 56 for electrical connection of each fan. It has some filters of efficiency G4, easily removable.

Fully removable 20 mm of thickness sandwich panels. They are composed of galvanized steel inside or outside sandwich panels, easy to open. Units are precoated galvanized sheet metal frame RAL 9002. The unit is equipped with crossed air-to-air heat recovery with aluminum heat exchanger plates and supplementary sealing. It has aluminum condensate tray with 2 outlet tubes that covers all of heating/cooling components. Contain mineral wool heat and sound insulation with 20 mm of thickness, density 40 kg/m3 and fire reaction A1. Supply and exhaust fans are centrifugal double inlet forward curved and a multispeed electric motor directly coupled to the turbine. The unit is completed with electric box IP 56 for electrical connection of each fan. It has some filters of efficiency G4, easily removable.

Fully removable 20 mm of thickness sandwich panels. They are composed of galvanized steel inside or outside sandwich panels, easy to open. Units are precoated galvanized sheet metal frame RAL 9002. The unit is equipped with crossed air-to-air heat recovery with aluminum heat exchanger plates and supplementary sealing. It has aluminum condensate tray with 2 outlet tubes that covers all of heating/cooling components. Contain mineral wool heat and sound insulation with 20 mm of thickness, density 40 kg/m3 and fire reaction A1. Supply and exhaust fans are centrifugal double inlet forward curved and a multispeed electric motor directly coupled to the turbine. The unit is completed with electric box IP 56 for electrical connection of each fan. It has some filters of efficiency G4, easily removable.

Fully removable 20 mm of thickness sandwich panels. They are composed of galvanized steel inside or outside sandwich panels, easy to open. Units are precoated galvanized sheet metal frame RAL 9002. The unit is equipped with crossed air-to-air heat recovery with aluminum heat exchanger plates and supplementary sealing. It has aluminum condensate tray with 2 outlet tubes that covers all of heating/cooling components. Contain mineral wool heat and sound insulation with 20 mm of thickness, density 40 kg/m3 and fire reaction A1. Supply and exhaust fans are centrifugal double inlet forward curved and a multispeed electric motor directly coupled to the turbine. The unit is completed with electric box IP 56 for electrical connection of each fan. It has some filters of efficiency G4, easily removable.

Fully removable 20 mm of thickness sandwich panels. They are composed of galvanized steel inside or outside sandwich panels, easy to open. Units are precoated galvanized sheet metal frame RAL 9002. The unit is equipped with crossed air-to-air heat recovery with aluminum heat exchanger plates and supplementary sealing. It has aluminum condensate tray with 2 outlet tubes that covers all of heating/cooling components. Contain mineral wool heat and sound insulation with 20 mm of thickness, density 40 kg/m3 and fire reaction A1. Supply and exhaust fans are centrifugal double inlet forward curved and a multispeed electric motor directly coupled to the turbine. The unit is completed with electric box IP 56 for electrical connection of each fan. It has some filters of efficiency G4, easily removable.

Fully removable 20 mm of thickness sandwich panels. They are composed of galvanized steel inside or outside sandwich panels, easy to open. Units are precoated galvanized sheet metal frame RAL 9002. The unit is equipped with crossed air-to-air heat recovery with aluminum heat exchanger plates and supplementary sealing. It has aluminum condensate tray with 2 outlet tubes that covers all of heating/cooling components. Contain mineral wool heat and sound insulation with 20 mm of thickness, density 40 kg/m3 and fire reaction A1. Supply and exhaust fans are centrifugal double inlet forward curved and a multispeed electric motor directly coupled to the turbine. The unit is completed with electric box IP 56 for electrical connection of each fan. It has some filters of efficiency G4, easily removable.

Fully removable 20 mm of thickness sandwich panels. They are composed of galvanized steel inside or outside sandwich panels, easy to open. Units are precoated galvanized sheet metal frame RAL 9002. The unit is equipped with crossed air-to-air heat recovery with aluminum heat exchanger plates and supplementary sealing. It has aluminum condensate tray with 2 outlet tubes that covers all of heating/cooling components. Contain mineral wool heat and sound insulation with 20 mm of thickness, density 40 kg/m3 and fire reaction A1. Supply and exhaust fans are centrifugal double inlet forward curved and a multispeed electric motor directly coupled to the turbine. The unit is completed with electric box IP 56 for electrical connection of each fan. It has some filters of efficiency G4, easily removable.

In the static heat recovery units the heat exchange is done using a set of methalic plates, normally aluminum, through which the exterior and interior airflows pass. The two fans it includes force both the interior and exterior air to pass through the exchanger, without coming into contact in any moment. In winter, the air which is expelled outside transfers its heat to the air coming inside, meanwhile in summer the air coming inside transfers its heat to the air expelled. This way it is assured that the building's interior has a clean air, we obtain an important energy saving and we reduce its relative humidity. Examples of application of this units can be commercial buildings (restaurants, shops, ...), as well as all buildings with residential activities in which it is necessary to have an exchange of fresh and clean air taken from the outside, and expelling at the same time the interior air full of smoke and odors without losing all its energy. The plates exchangers that the heat recovery series of the new serie RCAH+-RCAV+ include, come equipped with aluminium plates, crossed circuit, between the extraction and the inlet of renewal air, with an efficiency level between the 51,8% and the 57,8%m according to the legislation RITE. The heat recoveries of the series RCAH+ – RCAV+ are ready so that they can incorporate an adiabatic cooling module in the air extraction, as it is specified in the RITE. MAIN FEATURES • Airlow rates ranging from 1.400 to 6.000 m3/h • Unit available in horizontal or vertical configuration • Versions with by-pass for free-cooling. The by-pass versions are integrated in the units and motorized • Very easy access to the unit for maintenance • Double acoustic panel sanwich type • Low noise level • Inverter motor integrated • Efficiency filters F6-F7-F8 • Differential pressure switch • Electronic control integrated

In the static heat recovery units the heat exchange is done using a set of methalic plates, normally aluminum, through which the exterior and interior airflows pass. The two fans it includes force both the interior and exterior air to pass through the exchanger, without coming into contact in any moment. In winter, the air which is expelled outside transfers its heat to the air coming inside, meanwhile in summer the air coming inside transfers its heat to the air expelled. This way it is assured that the building's interior has a clean air, we obtain an important energy saving and we reduce its relative humidity. Examples of application of this units can be commercial buildings (restaurants, shops, ...), as well as all buildings with residential activities in which it is necessary to have an exchange of fresh and clean air taken from the outside, and expelling at the same time the interior air full of smoke and odors without losing all its energy. The plates exchangers that the heat recovery series of the new serie RCAH+-RCAV+ include, come equipped with aluminium plates, crossed circuit, between the extraction and the inlet of renewal air, with an efficiency level between the 51,8% and the 57,8%m according to the legislation RITE. The heat recoveries of the series RCAH+ – RCAV+ are ready so that they can incorporate an adiabatic cooling module in the air extraction, as it is specified in the RITE. MAIN FEATURES • Airlow rates ranging from 1.400 to 6.000 m3/h • Unit available in horizontal or vertical configuration • Versions with by-pass for free-cooling. The by-pass versions are integrated in the units and motorized • Very easy access to the unit for maintenance • Double acoustic panel sanwich type • Low noise level • Inverter motor integrated • Efficiency filters F6-F7-F8 • Differential pressure switch • Electronic control integrated

In the static heat recovery units the heat exchange is done using a set of methalic plates, normally aluminum, through which the exterior and interior airflows pass. The two fans it includes force both the interior and exterior air to pass through the exchanger, without coming into contact in any moment. In winter, the air which is expelled outside transfers its heat to the air coming inside, meanwhile in summer the air coming inside transfers its heat to the air expelled. This way it is assured that the building's interior has a clean air, we obtain an important energy saving and we reduce its relative humidity. Examples of application of this units can be commercial buildings (restaurants, shops, ...), as well as all buildings with residential activities in which it is necessary to have an exchange of fresh and clean air taken from the outside, and expelling at the same time the interior air full of smoke and odors without losing all its energy. The plates exchangers that the heat recovery series of the new serie RCAH+-RCAV+ include, come equipped with aluminium plates, crossed circuit, between the extraction and the inlet of renewal air, with an efficiency level between the 51,8% and the 57,8%m according to the legislation RITE. The heat recoveries of the series RCAH+ – RCAV+ are ready so that they can incorporate an adiabatic cooling module in the air extraction, as it is specified in the RITE. MAIN FEATURES • Airlow rates ranging from 1.400 to 6.000 m3/h • Unit available in horizontal or vertical configuration • Versions with by-pass for free-cooling. The by-pass versions are integrated in the units and motorized • Very easy access to the unit for maintenance • Double acoustic panel sanwich type • Low noise level • Inverter motor integrated • Efficiency filters F6-F7-F8 • Differential pressure switch • Electronic control integrated

In the static heat recovery units the heat exchange is done using a set of methalic plates, normally aluminum, through which the exterior and interior airflows pass. The two fans it includes force both the interior and exterior air to pass through the exchanger, without coming into contact in any moment. In winter, the air which is expelled outside transfers its heat to the air coming inside, meanwhile in summer the air coming inside transfers its heat to the air expelled. This way it is assured that the building's interior has a clean air, we obtain an important energy saving and we reduce its relative humidity. Examples of application of this units can be commercial buildings (restaurants, shops, ...), as well as all buildings with residential activities in which it is necessary to have an exchange of fresh and clean air taken from the outside, and expelling at the same time the interior air full of smoke and odors without losing all its energy. The plates exchangers that the heat recovery series of the new serie RCAH+-RCAV+ include, come equipped with aluminium plates, crossed circuit, between the extraction and the inlet of renewal air, with an efficiency level between the 51,8% and the 57,8%m according to the legislation RITE. The heat recoveries of the series RCAH+ – RCAV+ are ready so that they can incorporate an adiabatic cooling module in the air extraction, as it is specified in the RITE. MAIN FEATURES • Airlow rates ranging from 1.400 to 6.000 m3/h • Unit available in horizontal or vertical configuration • Versions with by-pass for free-cooling. The by-pass versions are integrated in the units and motorized • Very easy access to the unit for maintenance • Double acoustic panel sanwich type • Low noise level • Inverter motor integrated • Efficiency filters F6-F7-F8 • Differential pressure switch • Electronic control integrated

The new stand-alone RCAH RCF units are dedicated to the reflling of room air and its thermal treatment. They are designed and developed for satisfying four different typical needs of residential and commercial applications. - The renewal of room air - The energy saving by using a heat recovery system - The neutralisation of the renewal air heat loads, by a fully automatic microprocessor controlled heat pump system - The neutralisation of room heat loads RCAH RCF unit works with 100% fresh air with total cooling capacity from 5,4 to 23,5kW and total heating capacity from 8,9 to 40,4kW. Prepainted frame and fully removable sandwich panels with 20 mm thickness polyethylene/polyester thermal and acoustic insulation. High efficiency crossflow heat recovery, aluminum heat exchanger plates with supplementary sealing; stainless steel drain tray, extended to all the cooling/heating components and heat insulated, complete with water trap. G4 efficiency class synthetic cell filters. Heat pump refrigeration system (R410A) composed of scroll hermetic compressor, Cu-Al evaporator and condenser coils, biflow thermostatic valve, liquid separator and receiver, 4-way valve for cycle inversion, overpressure safety valve, high and low pressure switches, biflow freon filter and liquid indicator.

The new stand-alone RCAH RCF units are dedicated to the reflling of room air and its thermal treatment. They are designed and developed for satisfying four different typical needs of residential and commercial applications. - The renewal of room air - The energy saving by using a heat recovery system - The neutralisation of the renewal air heat loads, by a fully automatic microprocessor controlled heat pump system - The neutralisation of room heat loads RCAH RCF unit works with 100% fresh air with total cooling capacity from 5,4 to 23,5kW and total heating capacity from 8,9 to 40,4kW. Prepainted frame and fully removable sandwich panels with 20 mm thickness polyethylene/polyester thermal and acoustic insulation. High efficiency crossflow heat recovery, aluminum heat exchanger plates with supplementary sealing; stainless steel drain tray, extended to all the cooling/heating components and heat insulated, complete with water trap. G4 efficiency class synthetic cell filters. Heat pump refrigeration system (R410A) composed of scroll hermetic compressor, Cu-Al evaporator and condenser coils, biflow thermostatic valve, liquid separator and receiver, 4-way valve for cycle inversion, overpressure safety valve, high and low pressure switches, biflow freon filter and liquid indicator.

The new stand-alone RCAH RCF units are dedicated to the reflling of room air and its thermal treatment. They are designed and developed for satisfying four different typical needs of residential and commercial applications. - The renewal of room air - The energy saving by using a heat recovery system - The neutralisation of the renewal air heat loads, by a fully automatic microprocessor controlled heat pump system - The neutralisation of room heat loads RCAH RCF unit works with 100% fresh air with total cooling capacity from 5,4 to 23,5kW and total heating capacity from 8,9 to 40,4kW. Prepainted frame and fully removable sandwich panels with 20 mm thickness polyethylene/polyester thermal and acoustic insulation. High efficiency crossflow heat recovery, aluminum heat exchanger plates with supplementary sealing; stainless steel drain tray, extended to all the cooling/heating components and heat insulated, complete with water trap. G4 efficiency class synthetic cell filters. Heat pump refrigeration system (R410A) composed of scroll hermetic compressor, Cu-Al evaporator and condenser coils, biflow thermostatic valve, liquid separator and receiver, 4-way valve for cycle inversion, overpressure safety valve, high and low pressure switches, biflow freon filter and liquid indicator.

The new stand-alone RCAH RCF units are dedicated to the reflling of room air and its thermal treatment. They are designed and developed for satisfying four different typical needs of residential and commercial applications. - The renewal of room air - The energy saving by using a heat recovery system - The neutralisation of the renewal air heat loads, by a fully automatic microprocessor controlled heat pump system - The neutralisation of room heat loads RCAH RCF unit works with 100% fresh air with total cooling capacity from 5,4 to 23,5kW and total heating capacity from 8,9 to 40,4kW. Prepainted frame and fully removable sandwich panels with 20 mm thickness polyethylene/polyester thermal and acoustic insulation. High efficiency crossflow heat recovery, aluminum heat exchanger plates with supplementary sealing; stainless steel drain tray, extended to all the cooling/heating components and heat insulated, complete with water trap. G4 efficiency class synthetic cell filters. Heat pump refrigeration system (R410A) composed of scroll hermetic compressor, Cu-Al evaporator and condenser coils, biflow thermostatic valve, liquid separator and receiver, 4-way valve for cycle inversion, overpressure safety valve, high and low pressure switches, biflow freon filter and liquid indicator.

The new stand-alone RCAH RCF units are dedicated to the reflling of room air and its thermal treatment. They are designed and developed for satisfying four different typical needs of residential and commercial applications. - The renewal of room air - The energy saving by using a heat recovery system - The neutralisation of the renewal air heat loads, by a fully automatic microprocessor controlled heat pump system - The neutralisation of room heat loads RCAH RCF unit works with 100% fresh air with total cooling capacity from 5,4 to 23,5kW and total heating capacity from 8,9 to 40,4kW. Prepainted frame and fully removable sandwich panels with 20 mm thickness polyethylene/polyester thermal and acoustic insulation. High efficiency crossflow heat recovery, aluminum heat exchanger plates with supplementary sealing; stainless steel drain tray, extended to all the cooling/heating components and heat insulated, complete with water trap. G4 efficiency class synthetic cell filters. Heat pump refrigeration system (R410A) composed of scroll hermetic compressor, Cu-Al evaporator and condenser coils, biflow thermostatic valve, liquid separator and receiver, 4-way valve for cycle inversion, overpressure safety valve, high and low pressure switches, biflow freon filter and liquid indicator.

The new stand-alone RCAH RCF units are dedicated to the reflling of room air and its thermal treatment. They are designed and developed for satisfying four different typical needs of residential and commercial applications. - The renewal of room air - The energy saving by using a heat recovery system - The neutralisation of the renewal air heat loads, by a fully automatic microprocessor controlled heat pump system - The neutralisation of room heat loads RCAH RCF unit works with 100% fresh air with total cooling capacity from 5,4 to 23,5kW and total heating capacity from 8,9 to 40,4kW. Prepainted frame and fully removable sandwich panels with 20 mm thickness polyethylene/polyester thermal and acoustic insulation. High efficiency crossflow heat recovery, aluminum heat exchanger plates with supplementary sealing; stainless steel drain tray, extended to all the cooling/heating components and heat insulated, complete with water trap. G4 efficiency class synthetic cell filters. Heat pump refrigeration system (R410A) composed of scroll hermetic compressor, Cu-Al evaporator and condenser coils, biflow thermostatic valve, liquid separator and receiver, 4-way valve for cycle inversion, overpressure safety valve, high and low pressure switches, biflow freon filter and liquid indicator.

The new stand-alone RCAH RCF units are dedicated to the reflling of room air and its thermal treatment. They are designed and developed for satisfying four different typical needs of residential and commercial applications. - The renewal of room air - The energy saving by using a heat recovery system - The neutralisation of the renewal air heat loads, by a fully automatic microprocessor controlled heat pump system - The neutralisation of room heat loads RCAH RCF unit works with 100% fresh air with total cooling capacity from 5,4 to 23,5kW and total heating capacity from 8,9 to 40,4kW. Prepainted frame and fully removable sandwich panels with 20 mm thickness polyethylene/polyester thermal and acoustic insulation. High efficiency crossflow heat recovery, aluminum heat exchanger plates with supplementary sealing; stainless steel drain tray, extended to all the cooling/heating components and heat insulated, complete with water trap. G4 efficiency class synthetic cell filters. Heat pump refrigeration system (R410A) composed of scroll hermetic compressor, Cu-Al evaporator and condenser coils, biflow thermostatic valve, liquid separator and receiver, 4-way valve for cycle inversion, overpressure safety valve, high and low pressure switches, biflow freon filter and liquid indicator.